|
|
|
| Panavise Work Holding Devices |
|
Page 67 |
| For over 40 years, Panavise Work Holding Devices have become more of a necessity then a convenience for any work bench. Circuit board holder #315, along with any base, excels at holding a circuit board while soldering or repairing components. Standard head #303 is excellent for holding connectors while you solder them or other small parts. Why not make your life easier. Order a Panavise product today. | |
 |
STANDARD BASE
(300) Standard base holds all regular 300 series heads and PCB holders Split-ball feature permits work in various positions - turns and tilts. 3 base mounting holes in the lugs allow permanent mounting of base. PAN 300................................$19.95 |
|
|
|
 |
VACUUM
BASE (380) A special base for portable applications. Moving the black-tipped lever arm attaches the vacuum base instantly to any smooth non-porpous surface, without maring. A flip of the lever releases the base. Accepts all 5/8” stems into base. Special head can tilt 45 degrees. PAN 380................................$31.99 |
|
|
|
 |
CIRCUIT BOARD
HOLDER (315) Circuit board holder: holds PC boards of any shape, up to 12” wide in any position. Tension arm permits easy board insertion. Both arms extend 6” from the bar, with V-grove grip designed to hold PCB’s up to 5/32” thick. fits all 300 series bases. PAN 315................................$29.99 |
|
|
|
 |
STANDARD PANAVISE
(301) All purpose work holding unit. It tilts, turns and rotates. This combination consists of the 300 Standard Base and the 303 Standard Head which has 2-1/2” wide nylon jaws that open 2 1/4” for firm but damage free grip. Control knob locks the work firmly in any position. PAN 301................................$42.99 |
|
|
|
 |
ELECTRONIC WORK
CENTER (324) A complete electronic work center. The work station gives you a circuit board holder, standard base, tray base mount, and solder station, all in one package. Keeps work areas more efficient and manageable. Soldering iron not included. PAN 324 ...............................$76.99 |
|
|
|
 |
LOW PROFILE BASE
(305) Low profile base has same features as model 300 except it is only 2-1/2” high, for working close to bench surface.Can also be permanently mounted. PAN 305 ..................................$19.95 |
|
|
|
 |
BENCH CLAMP (311) Bench clamp designed for bases 300 and 305 with screws supplied. Height 6 3/4”, throat depth 2 3/8”, gripping range 0”-3 1/2”. PAN 311 ..................................$38.99 |
|
|
|
 |
WIDE OPENING VERTICAL
VISE HEAD (366) Wide opening vertical vise head fits all 300 series bases. Neoprene reversible, replaceable pads, rotates 360 .Tilt action 180 , grip range 0”-6”, jaw pad width 1 3/4”, throat depth 2”. PAN 366 ..................................$30.99 |
|
|
|
 |
STANDARD
VISE HEAD (303) Standard vise head has 2 1/2” wide nylon jaws that open 2-1/4” and allow firm but damage free grip. Fits 300 and 305 bases. PAN 303 ..................................$23.99 |
|
|
|
 |
WIDE OPENING HEAD
(396) A combination of the 366 Wide Opening Head and the 300 Standard Base, which makes this holding device very versatile for production lines, technicians, and designers. It opens to a full 6” to accommodate most PC boards. The deep-ribbed neoframe jaw pads reverse to hold delicate cylindrical objects: such as timers, coils, motor armatures, etc. PAN 396 ..................................$45.99 |
|
|
|
 |
TRAY BASE MOUNT
(312) Designed for the low profile, and standard base. This is a very stable work platform, yet is easily portable. Six individual trays are cast into base for holding of small parts. Tray mount is exceptionally stable and resists tipping. It has 6 non-marring, anit-skid base pads. Standard base attached with 3 screws included with base.
|
|
|
|
 |
WEIGHTED
BASE MOUNT (308) Weighted base mount holds model 300 or 305 base with 3 screws and nuts, which are included. Weights 5 lbs., cast iron.
|
|
|
|
|
|
REPLACEMENT
JAWS FOR 303 AND 304* HEADS
Model 343 — The 343 Nylon Jaws are included
with the 303 Model 344 — The 344 Grooved Nylon Jaws are
similar to the 343 Model 353 — These husky jaws are recommended
when working Model 354 — The 354 Brass Jaws are a non-marring
alternative to
|
|
|
|
| PANAVISE JR. — THE VISE THAT BECOMES A TOOL | |||
|
Great for Do-It-Yourselfers, for hobby work, for general repair around
the house as well as professional electronics, jewelry and camera repair.
There is no other vise like it that "twists, turns and tilts"
to hold everything just the way you want it. |
|
||
 |
 |
 |
|
| Model 201 — This popular, small precision PanaVise has all
of the traditional "tilt, turn and rotate" features of its big
brothers. More like a tool than a vise, the grooved jaws open to 2 7/8"
(74mm) and are made of fiber reinforced thermal composite alloy. Jaws
are controlled with a fine/coarse adjusting knob which permits very delicate
work. Head movement is through three planes (360º rotation, 360º
swivel and 210º pivot) and is controlled with a single knob. The
PVJr.'s base is made of die cast zinc for years of continuous use, with a 4 5/16" (111mm) bolt circle countersunk for 1/4" (6mm) flathead bolts (not included) This unique vise is 6 3/4" (173mm) tall, weighs 1 1/4 lbs. (0.6kg), |
|||
PAN201 ....................................... $21.95 |
|||
