|
|
|
| Printed circuit board supplies |
|
Page 55 |
| DIRECT ETCH™ RESIST PENS |  |
|
These pens are filled with lacquer ink that is resistant against aqueous
PC etch solutions. Ideal for photo resist patterns touch-up or for direct-etched boards with tight spaces. Board must be clean for best results. Available in 2 size widths. |
| ER-15 ........................ FINE POINT ........................
$1.80 ER-25 ..................EXTRA FINE POINT ................. $1.95 |
|
|
DRY CONCENTRATED ETCHANT
(FERRIC CHOLRIDE)
Ferric Chloride is the best choice for etching copper PC boards. Datak |
|
ER-3 1/4 lb. ETCHANT POWDER.....................
$5.95 ER-21 1 lb. ETCHANT POWDER...................... $13.95 ER-22 2 lb. ETCHANT POWDER...................... $20.95 |
|
|
TINIT™ TIN PLATE Tinnit™ will plate a copper clad board with a bright tin plate approx. .0004" thick. Enhances solderability, resists oxidation. Also use on card edge contact fingers. Supplied as a dry concentrate; just add water. One pint plates up to 600 sq. inches of copper. May be used to plate some other metals such as brass, bronze, iron; anything more active than tin. Plating is complete in about 10 minutes in a fresh solution. TINNIT™ is supplied as a dry mixture with indefinite shelf life. When mixed with water, the solution has approximately a 2 month life. No Air Shipments. No Mail
Shipments. |
| ER-18 ........................ 1 PINT SIZE
...................... $7.95 ER-181 ................. 1/2 GALLON SIZE ................. $18.95 |
 |
ETCH RESIST LACQUER Fast drying, easy to apply resist circuit pattern on PC boards. Also used to "touch-up" or modify photo resist patterns before etching. Bottle is supplied with small brush attached to cap. 22-244 ...... (BOTTLE 1/2 FL. OZ.) ....... $7.95 No Air Shipments. No Mail
Shipments. |
|
|
STRIPPING SOLUTION Removes remaining etch resist from PC boards. Removes any coating that remains over the copper after etching which may interfere with the soldering of the component leads to the PC board. 22-240 .... (BOTTLE 2 FL. OZ. 59 ML) ....... $5.95 No Air Shipments. No Mail
Shipments. |
| BURNISHING TOOLS |
|
A quality stylus burnisher will give you a better, easier job with dry transfers
than using a ball point pen. Polished metal tips provide even transfer, even if you use too much pressure. |
|
STANDARD TOOL, for characters and lines from .080" up to 1/4". The other end is a 3/8" felt, flexible burnisher.  04158 ......................................................................................... $5.29 SPOON TIP burnisher tool with tip suitable for transfers 1/4" and larger. Other end a 3/8" felt, flexible burnisher.  04159 .......................................................................................... $5.75 |
| DRAFTING KNIFE |
 |
A standard No. 1 modeler's knife, indispensable for drafting and printed circuit design; includes five assorted blades. Very handy for many uses in the shop. |
|
12161 ........ #1 KNIFE......................................
$3.22 12182 ........ BLADE REFILLS 5/PK .............. $1.59 |
 |
PRECISION KNIFE SET This kit is a must for hobbyist or anyone working with PC artwork. Very handy for many uses in the shop. Set Includes: • 3 Knife Handle • 1 Blade Holder • 10 Assorted Blades • Durable Solid Case for easy storing 10250 ....................................... $13.95 |
|
|
RECHARGEABLE
DRILL WITH 34 ACCESSORIES Ideal for PC board work, but capable of handling metal and plastic chassis boxes Contents:
|
| PLASTIC STORAGE BOTTLES |
|
Plastic storage
bottles for safe storage of your chemicals. Hundreds of other uses in the home, shop, or lab. Available in two sizes, 8oz and 16oz. 12-506 8oz Bottle........................ $1.29 12-516 16oz Bottle...................... $1.59 |
|
|
DEVELOPING & ETCHING TRAYS Plastic trays are for etching with Ferric Chloride solutions or for positive developing. Made of high grade plastic. |
