PC Drafting Patterns

PC Drafting Patterns

Scroll Back to Page 50

Page 51

Scroll Forward to Page 52

JOTDRAFT™ PAD PATTERNS, PACKAGE OUTLINES, DIP TERMINAL MARKERS

These patterns can be lifted and repositioned.
All illustrations are 2 times scale unless otherwise specified.

STYLE	SCALE	NO. OF PATTERNS	CAT. NO.	PRICE	QTY
TO-3 OUTLINE	2x	18	JDS-53	$5.95
TO-3 OUTLINE	1X	48	JDS-54	$5.95
TO-66 OUTLINE	2x	24	JDS-56	$5.95
TO-66 OUTLINE	1X	80	JDS-57	$5.95
TO-5 OUTLINE	2x	88	JDS-24	$5.95
TO-5 OUTLINE	1X	33	JDS-25	$5.95
TO-18 OUTLINE	2x	192	JDS-30	$5.95
TO-18 OUTLINE	1X	60	JDS-31	$5.95
TO-92 OUTLINE	2x	408	JDS-36	$5.95
TO-92 OUTLINE	1X	704	JDS-37	$5.95
TO-3 PAD PTRN.	2x	32	JDS-108	$5.95
TO-3 PAD PTRN.	1X	104	JDS-109	$5.95
TO-5 PAD PTRN.	2x	144	JDS-82	$5.95
TO-5 PAD PTRN.	1x	336	JDS-83	$5.95
TO-18 PAD PTRN.	2x	288	JDS-88	$5.95
TO-18 PAD PTRN.	1x	608	JDS-89	$5.95
TO-66 PAD PTRN.	2x	64	JDS-111	$5.95
TO-66 PAD PTRN.	1x	104	JDS-112	$5.95
TO-3 PAD PTRN.	2x	144	JDS-76	$5.95
TO-3 PAD PTRN.	1x	312	JDS-77	$5.95
TO-66 PAD PTRN.	2x	264	JDS-91	$5.95
TO-66 PAD PTRN.	1x	608	JDS-92	$5.95
TO-5 PAD PTRN.	2x	144	JDS-70	$5.95
TO-5 PAD PTRN.	1x	384	JDS-71	$5.95
TO-18 PAD PTRN	2x	120	JDS-73	$5.95
TO-18 PAD PTRN	1x	384	JDS-74	$5.95

EDGE CARD CONNECTOR FINGERS

These universal fingers rub down separately, so 1X patterns work as DIRECT ETCH resist. The extra length is for connecting to a plating bar. To shorten a finger, 1) cut lightly with a knife (cat # 12161). 2) apply "Scotch" or other brand cellophane tape to the cut section. 3) remove the tape along with the surplus.

JD-168 .060" x .500" fingers on .100" centers. .015" D pilot hole.

JD-122B .050" x .500" fingers on .125" centers. .015" D pilot hole.

JD-122 .080" x .500" fingers on .156" centers. .015" D pilot hole.

CTR. TO CTR. SPACING	NO. OF FINGERS	SCALE	CAT. NO.	PRICE	QTY
.156"	624	2x	JD-121	$10.65
.156"	1224	1x	JD-122	$10.65
.125"	792	2x	JD-166	$10.65
.125"	1488	1x	JD-122B	$10.65
.100"	984	2x	JD-123	$10.65
.100"	3888	1x	JD-168	$10.65

DOTDRAFT UNIVERAL PATTERNS

These Dry-Transfer patterns may be transferred Pad-by-Pad, allowing you to "build" any pattern that has .100" pin spacing and .300" between pin rows (i.e. any I.C. etc.) all without measuring. The 1X patterns may be used either in artwork or as direct etch resist on copper.

DESCRIPTION
.125"D x .070" cut pad with .020" hole on .100" x 150" precision
centers Includes pin 1 Identifiers.

DESCRIPTION
.125"D x .053" cut pad with .015" hole on .015" trace on
.100" x .300" precision centers with pin 1 identifiers.

DESCRIPTION
..055" x .015" donuts on .100" x .150" precision centers.

DESCRIPTION
..025" x .075" rectangular pads on .050" x .225" and
.375" precision centers. For "SO" packages.

QTY/SET	SCALE	CAT. NO.	PRICE	QTY
4920	2x	JD-170	$10.65
11520	1x	JD-171	$10.65