PC Drafting Patterns

Scroll Back to Page 49

Page 50

Scroll Forward to Page 51
PRINTED CIRCUIT TAPES
These precision tapes are used throughout the industry for creating conductors between component pads on PC artwork. They may be used either for orginal PC art or on the copper surface itself to act as an etch resist when making prototypes. The tape is made of crepe .005" thick with and adhesive back. The crepe is a flexible material and corners can be followed after developing a bit of skill. Black is the standard color. Many widths are available for various current conductors or for use in 2x or 4x scale artwork. DATAK tapes are twice as long as other brands. 720" length.
PC-1     .015" Thickness $1.90
PC-2     .020" Thickness $1.90
PC-4     .031" Thickness $1.90
PC-5     .040" Thickness $1.90
PC-6     .050" Thickness $2.00
PC-8     .080" Thickness $2.50
PC-10     .100" Thickness $2.50
PC-11    .125" Thickness $2.90
PC-12     .150" Thickness $3.85
PC-15     .250" Thickness $3.85
PC-16     .300" Thickness $3.85


DONUT PADS
This JotDraft series consists of a very wide selection of pre-spaced Donut Pads for use in PC artworks. All products on this page are Dry- Transfers,that is to be rubbed down on your drawings with a burnishing tool. These rugged pads may also be used as direct etch resist patterns in that they may be directly to the copper surface for use as an etch resist. You may rub-down one pad or a long series of pads for mutiple-leaded components.Use Datak tapes for interconnections. Note: Pads are black and have a precise inside hole listed.

JDS-510

 OD .062" ID .015"  QTY/set 7776 $5.95

JDS-506

 OD .100" ID .030" QTY/set 2592 $5.95

JDS-509

 OD .124" ID .030" QTY/set 2592 $5.95

JDS-137

 OD .187" ID .031" QTY/set 4608 $9.95

JDS-602

 OD .240" ID .060" QTY/set 640 $5.95

JDS-342

 OD .300" ID .031" QTY/set 1920 $9.95


JOTDRAFT™ 14 THROUGH 40 PIN DUAL INLINE PATTERNS (DIP)
LARGE AREA CUT PAD
These patterns all use a tough, clear "JD carrier film" that lets you transfer the entire pattern by merely rubbing along one edge with a burnishing tool (cat #04158, spoon type or #04159, ball type). Good results are also achieved on the smaller patterns with a ball point pen. To reduce a pattern pin count, transfer a longer pattern in place, lightly score the JD carrier film with drafting knife, and peel away the extra pads. Please note: the carrier film prevents these patterns from being used as DIRECT ETCH resist.



LARGE AREA CUT PAD, Pin 1 Identifier Dims:.125" Dia. x .070" with .020" hole.
NO. OF LEADS SPACING L" x W" NO. OF PATTERNS SCALE CAT.
NO.		 PRICE QTY
14 .100 x .300 CENTERS 168 2x JD-67 $9.95
14 .100 x .300 CENTERS 432 1x JD-68 $9.95
16 .100 x .300 CENTERS 168 2x JD-64 $9.95
16 .100 x .300 CENTERS 384 1x JD-65 $9.95
20 .100 x .300 CENTERS 144 2x JD-575 $9.95
20 .100 x .300 CENTERS 336 1x JD-576 $9.95
24 .100 x .300 CENTERS 108 2x JD-394 $9.95
24 .100 x .300 CENTERS 288 1x JD-395 $9.95
24 .100 x .600 CENTERS 24 2x JDS-396 $9.95
24 .100 x .600 CENTERS 64 1x JDS-397 $9.95
28 .100 x .600 CENTERS 72 2x JDS-398 $9.95
28 .100 x .600 CENTERS 192 1x JDS-399 $9.95
40 .100 x .600 CENTERS 16 2x JDS-400 $9.95
40 .100 x .600 CENTERS 48 1x JDS-401 $9.95


JOTDRAFT™ 14 THROUGH 40 PIN DUAL INLINE PATTERNS (DIP)
NARROW AREA CUT PAD
These patterns all use a tough, clear "JD carrier film" that lets you transfer the entire pattern by merely rubbing along one edge with a burnishing tool (cat #04158, spoon type or #04159, ball type). Good results are also achieved on the smaller patterns with a ball point pen. To reduce a pattern pin count, transfer a longer pattern in place, lightly score the JD carrier film with drafting knife, and peel away the extra pads. Please note: the carrier film prevents these patterns from being used as DIRECT ETCH resist.



NARROW AREA CUT PAD,
 .015" TRACE, Pin 1 Identifier Dims:
.125" Dia. x .053" with .015" hole.
NO. OF LEADS SPACING L" x W" NO. OF PATTERNS SCALE CAT.
NO.		 PRICE QTY
14 .100 x .300 CENTERS 168 2x JD-182 $9.95
14 .100 x .300 CENTERS 480 1x JD-183 $9.95
16 .100 x .300 CENTERS 168 2x JD-179 $9.95
16 .100 x .300 CENTERS 432 1x JD-180 $9.95
20 .100 x .300 CENTERS 144 2x JD-585 $9.95
20 .100 x .300 CENTERS 336 1x JD-586 $9.95
24 .100 x .300 CENTERS 108 2x JD-587 $9.95
24 .100 x .300 CENTERS 288 1x JD-588 $9.95
24 .100 x .600 CENTERS 24 2x JD-589 $9.95
24 .100 x .600 CENTERS 64 1x JD-590 $9.95
28 .100 x .600 CENTERS 66 2x JD-591 $9.95
28 .100 x .600 CENTERS 192 1x JD-592 $9.95
40 .100 x .600 CENTERS 16 2x JDS-593 $9.95
40 .100 x .600 CENTERS 48 1x JDS-594 $9.95


DIN 41612 UNIVERSAL SPACED PADS
These universal patterns let you “build” any DIN pin pattern from 16 to 96 pins, just by rubbing down the appropriate pad rows. All patterns are 32 by 5 pads on .100” centers. 1x patterns work as DIRECT ETCH resist.

JD-557 .060"OD X .015"ID 24 2X .................$9.95



JD-558 96 1X ...................................................$9.95



JD-569 .060"SQ X .015"ID 24 2X .................$9.95



JD-570 96 1X ...................................................$9.95
COPY CLEAR SHEETS
For use in laser printers and most dry toner copy machines to make film positives. Great for copying circuits from magazine or printing out circuits designed on PC DATAK 12-077 Software (pg. 53) Pkg. of 5 sheets (8 1/2" x 11")


12-500 .................................... $3.80
GRID SHEETS
1/10" GRID SHEETS

1/10" Grid Sheets printed in non-repro blue. Perfect for circuit layout when used under DATAK clear layout film. (No. MS-21) Pkg. of 3 sheets (8 1/2" x 11")

12-505 .................................... $1.20
DRAFTING FILM FOR PC ARTWORK
A translucent polyester film for use as a carrier film on which drafting symbols can be placed to make original artwork. One side is a matte finish to accept pencil or ink. 8 1/2" x 11" sheets.

2 sheets per package
MS-21.................................... $2.50