|
|
|
| PC Protoboards |
|
Page 48 |
|
PROTOBOARDS for quick, easy circuit assembly. Protoboards are ideal for the assembly of your "one only" circuits or pre-production prototypes. All have copper on one side, drilled to accommodate component leads and ready to solder. The industry standard component lead-spacing of 1/10" inch is adhered to in all boards. Except for the smallest board, the component side is silk-screened so that you will know where the copper conductors are located on the opposite side of the board. Board material is 1/16" inch thick phenolic with one ounce of copper. |
 |
Experimenters general purpose
mini-board
1.80"W x 3.60"L |
| 12-602..........$2.25 |
 |
IC Experimenter's board
1.40"W x 3.60"L |
| 12-607..........$2.25 |
 |
Small PC board, featuring
drilled copper pads connected (via traces) in groups of two and three to
accommodate circuits with a lot of common tie points.
1.70"W x 2.90"L |
 |
| 12-611............$1.80 |
||
 |
This medium size board has plenty of room for medium sized circuits with
several IC's and a lot of components.
5.10"L
x 1.90"W |
| 12-617..........$2.60 |
 |
This is a big board that
will contain circuits of considerable size. Board size is 5.50" x 4.30", the drilled hole and pad count is over 1,900. |
| 12-600..........$4.95 |
|
PERFORATED "XXP" PHENOLIC CIRCUIT BOARDS |
|
Unexcelled for prototypes, breadboards, hobby or science projects. Made
of tough phenolic with punched holes. Boards are bare phenolic — NO COPPER CLAD. |
 |
Std. board "A" .0.93" holes; 0.265"
spacing
3 3/4" wide x 8" long |
| 22-518.......... $5.85 |
 |
Microboard "P" .0.042" holes; 0.100" spacing 2 1/4" wide x 6" long |
| 22-514.......... $4.90 |
 |
Microboard "P" .0.042" holes; 0.100" spacing
4 1/2" wide x 6" long |
|
|
22-516..........$5.60 |
||
 |
PLUG-IN IC PHENOLIC Prototype Board IC’s plug directly into board. 0.1” spacing accepts 14 pin or 16 pin IC’s, up to 20 pin IC’s. Silver plated lands with 24-way card edge connector plug on one end. Made of tough phenolic. .1” centers 2-3/8” wide x 4” long x 1/16” thick, .035” holes. |
| 22-500
..........$3.60 |
 |
VERSA STRIP PHENOLIC Prototype Board Alpha numerical indexing. Silver plated land patterns. Predetermined short tracks for multi IC work. 0.1” centers x 3-1/2” wide x 6” long x 1/16” thick, .035” holes. |
| 22-502..........$6.95 |
 |
EXPORT DESIGN PHENOLIC Prototype Board Accommodates all types of IC’s, transistor packages and passive parts. Lands and buss bars are tinplated. 0.1” centers x 3 1/8” wide x 5 1/16” long x 1/16” thick. |
|
| 22-504..........$3.85 |
 |
EXPERIMENTER’S PHENOLIC Prototype Board Ready-to-use copper plated printed circuit board has 550 solder tie-points. 94 five-point terminals and two 40-point buss strips on 0.3” centers. Phenolic board has prepunched holes, mounting holes. 2” wide x 6” long x 1/16” thick. |
22-508..........$7.60 |
|
|
PRINTED STRIP PHENOLIC Prototype Board Alpha-numerical indexing. Tinplated land patterns for positive pin identification. 0.1” centers x 3-1/2” wide x 6” long x 1/16” thick, .035” holes. 3” x 4” |
22-506..........$5.95 |
|
|
STRIP PROTOBOARDS Copper strips on one side, 0.40” diameter holes are on 0.10” centers to accept common component leads. The strips run full length but user may break them up using an Xacto knife. These are handy for prototyping and may be cut with sheet metal sheer, hack saw etc. to make smaller boards. The board is xxp phenolic materal. |
|
|
12-618........................ $3.75 3-15/16” WIDE X 6 5/16” LENGTH 12-619 ...................... $4.75 3-15/16” WIDE X 9 13/16” LENGTH |
