|
|
|
| IC Sockets & Experimenter Products |
|
Page 105 |
|
Low Profile IC Sockets |
Wire Wrap IC Sockets |
 |
These low profile solder tail DIP sockets provide high reliability with high performance copper alloy contacts overplated with bright tin. |
|
Quality and high reliability DIP wire wrap sockets
with tin plated contacts. Available in all popular packages from 8 through
40 pin. |
| DIP Component Header Plugs |
|
|
| Allow for the mounting of discrete and passive components to a standard dip base. It can be plugged into a standard DIP IC socket or soldered directly to a PC Board. |
|
|
| 10.7 Mhz IF Transformer |
|
455 Khz IF Transformer |  |
| Commonly used for the second IF in receivers. Primary 15K, Secondary 300 Ohms | Used as a 1st IF transformer. Primary 50K, Secondary 500 Ohms. | ||
|
|
|
||
|
|
|
| 10.7 Mhz Ceramic Filter |  |
| Useful in all types of FM receivers, from commercial to
public service 2 meter amateur, etc. This part is frequently used in circuits using the MC3362 as well as other FM IF detector chips. |
|
86-1448............$2.90 |
|
|
|
| Electronic Xenon Flash Tube | |
 |
U-shaped for high FPS timing and signal light. Ideal for strobe light, photo flash, etc. Min. Anode Voltage 200V: Max Anode Voltage 400V Use with our No. J486 trigger coil shown below. |
|
J485............$7.95 |
|
|
|
| Trigger Coil |  |
| 4KV Use with No. J485 Xenon Flash Tube above. |
|
J486............$4.95 |
|
|
|
| Ultrasonic Transducer |  |
|
Transmits or receives 40Khz ultrasonic waves. For remote controls, radios, TV's, and appliances. Also used for remote switching such as door openers, remote signaling and ultrasonic intrusion protection devices and alarms. Diagram of practical circuits included. |
|
SQ-40............$4.99 |
|
|
|
| Photo Transistors |  |
3mm(T1) Viewing angle 30º
11-690............$0.99 5mm(T1-3/4) Viewing angle 35º 11-691............$0.99 |
| These devices are an electronic switch. When the unit is activated current is allowed to flow through the device. These items are used in optical encoders, automatic control systems, photo detectors and other applications where an optical switch is needed. Maximum breakdown voltage is 30 volts, typical voltage is 5 volts, and carrying current is 25mA. |
| DC Piezo Sounder | Sound output of 95dB minimum at a distance of 12
inches. Nominal frequency of 3Khz. Low energy consumption (20mA at 12VDC) makes it suitable for any number of alarm and signaling applications. Broad DC power range, 3-20VDC.
|
|
|
| Miniature Buzzers |  |
DCB814.........3V.......................$3.38
|
|
Solid state electronic buzzer with 70dB sound. High reliability, long life buzzer. Low current drain, no moving contacts. No arcing of RF noise. |
| Cadium Sulfide Photo Cells | |
|
|
Features: •
Epoxy - Coated Low Profile Cell •
High reliable power dissipation •
Compact dimensions Applications: •
Auto - Focus Slide
Projects •
Exposure Meters •
Contrast Control in
TV sets •
Dimmer Switches •
Dimmers for LED
and LCD Displays •
Flame Detectors in
Oil Burners •
StreetLamp Switching •
Electronic Toys •
OPTO - Couplers • Electronic Organs |
| The cadmium sulfide photo cell has a high resistance in darkness but resistance is quite low when in light of 100 foot-candles or more. A typical use is for switching on lighting after dark; also used in alarm systems, exposure meters, flame detectors, opto-couplers etc.. All three cells have a dark resistance of 5,000 ohms and 300 ohms in bright light (of 100 cds. or more). | |
| Part No. | Outside Diameter | Max Power | Price | QTY |
| PC10805 | 5mm | 90 Watts | $1.45 |
|
| PC10807 | 7mm | 150 Watts | $1.65 |
|
| PC10810 | 10mm | 400 Watts | $2.70 |
|
